Filter By:
Tools/Maintenance
$799.99
The BBP-AOS is used in conjunction with the BBP-1.2 Bottom Bracket Bearing Press Kit to extract press fit bottom bracket bearings, cups, and adaptors. The BBP-AOS utilizes an expanding collet and extractor cup system to safely remove bearings without requiring impact. Also included are eight installation drifts for pressing bearings into pre-installed cups.
- 8 precision-machined extractor cups and 5 hardened collets for compatibility with most bearing IDs and bearing/cup ODs
- 8 installation drifts for standalone bearing installation
- Organized in a convenient storage case
- Full list of compatible bearing inner/outer diameters found on instructions/parts diagram
NOTE: The BBP-AOS requires the BBP-1.2 Bottom Bracket Bearing Press Set for use. The BBP-1.2 and BBP-AOS are also available as a complete set (part # BBP-2).
$999.00
Park Tool's Bottom Bracket Tapping & Facing Set is a precision tool system which provides a piloted means of tapping the threads in the bottom bracket shell of a frame. After tapping, the taps act as guides to keep the included facing cutter perfectly square with the axis of the bottom bracket for cleanup of the faces of the bottom bracket shell. The BTS-1 includes English taps, 1.370" x 24 TPI right hand thread for the adjustable cup, and 1.370" x 24 TPI left hand thread for the fixed cup. Italian thread taps, 36mm x 24 TPI right hand thread (Part #693) for the adjustable and fixed cups, are available as accessories.
$839.99
The DT-5.2 is engineered and built to accurately face front or rear disc brake mounts so they are precisely aligned to the rotor.
- Faces any IS Mount, Post Mount, or new Shimano Flat Mount, including low clearance, chainstay mounts
- Telescoping axle adaptors allow use with any configuration of open or thru-axle dropouts and dropout widths (including Boost 110, Boost 148 and all fat bike axles)
- Includes two facing cutters:
IS Mounts
Post and Flat Mounts
- Includes storage case
$999.99
Proper frame preparation is very important. Park Tool's Head Tube Reaming and Facing Set (33.8mm reamer) combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. The HTR-1B comes with a reamer of 33.9mm for the 1-1/8 inch headset standard.
Includes:
• 33.9mm reamer (part #754.2), and four different size pilots (29.8mm, 30.0mm, 33.8mm, and 36.8mm)
• 690 Facer
• Quick-release, quick-adjust feature: bottom portion slides off and on easily without threading
SHIS terminology: The HTR-1B as stock will face frames of EC29, EC30, EC34 and EC37. It will ream frames of EC34. Accessories will allow service in other standards.
$909.99
The standard of the bike industry for over 40 years, the PRS-2.3 clamps two bikes and rotates horizontally 360 degrees, allowing one bike to be swung out of the way to work on another. Stand height and clamp position are firmly secured in place using our proven lock block system. Built from heavy-gauge oversized steel tubing, then chrome plated and powder coated for years of carefree use.
The PRS-2.3-1 features our 100-3C Adjustable Linkage Clamps, with a time-tested design and straightforward operation.
- Maximum weight capacity: 120 lbs. (54 kg)
- Clamp capacity: 0.875" to 1.625" (22–41 mm) diameter tubes
- Clamp jaws are nominally 4" (100 mm) wide
- Clamp height: adjustable from 50" to 62" (128–158 cm)
- Includes #105 Cast Aluminum Work Tray & RPP-1 Repair Stand Post Protector
- Can be installed onto the #135 Repair Stand Base or bolted directly to the floor using the FP-2 Floor Plate (both sold separately)
$899.99
- The PRS-2.3.1 is a professional quality double arm repair stand designed and built to withstand the rigors of everyday shop use.
- Includes two 100-3D Micro Adjust Clamps (clamps tubes up to 3", fully adjustable clamping pressure, narrow 2.7" clamping jaws)
- Clamps two bikes simultaneously
- Clamps rotate 360 degrees horizontally and vertically
- Heavy gauge, chrome plated steel tubing for rigidity and years of trouble free use
- Clamping height easily adjusts from 50" to 62" (128cm to 158cm) using heavy duty lock block and locking pin system
- Includes aluminum work tray
- #135 Steel Base Plate sold separately
- Use FP-2 Floor Mounting Plate to mount stand directly to floor (sold separately)
$779.99
Built to withstand the rigors of every day shop use, the PRS-3.3 is the stand of choice for professional mechanics around the world. Stand height and clamp position are firmly secured in place using our proven lock block system. Built from heavy-gauge oversized steel tubing, then chrome plated and powder coated for years of carefree use.
The PRS-3.3-2 features our 100-3D Micro-Adjust Clamp with narrow clamping jaws and a dual-stage, cam-actuated system that quickly adjusts to accommodate nearly any seat tube or frame size.
- Maximum weight capacity: 120 lbs. (54 kg)
- Clamp capacity: 0.875" to 3" (22–76 mm) diameter tubes, including aero tubes
- Clamp jaws are nominally 2.75" (70 mm) wide
- Clamp height: adjustable from 50" to 62" (128–158 cm)
- Includes #105 Cast Aluminum Work Tray & RPP-1 Repair Stand Post Protector
- Can be installed onto the #130 Repair Stand Base or bolted directly to the floor using the FP-2 Floor Plate (both sold separately)
$799.00
The SHX-1 Slide Hammer Extractor is a professional solution specifically designed for removing press fit cartridge bearings from bicycle components. Utilizing expanding collets, an extendable shaft, and a substantial (960g) slide hammer, the SHX-1 securely yet forcefully drives out cartridge bearings with targeted impact. The SHX-1 is compatible with cartridge bearings with inner diameters from 6 to 32 millimeters, covering most press fit applications found on bicycles including hubs, suspension linkages, and bottom brackets.
- Set of 5 expanding collets covers most bicycle bearing IDs from 6mm to 32mm
- Slide hammer shaft is extendable from 6.5" (165mm) to 13" (233mm) for additional force when needed
- Organized in a convenient storage case
Page 1 of 1