Accessories

The iXS mirrored lenses are UV protected. A large variety of colors, coatings and tints provide best flexibility for any light condition. Compatible with iXS Trigger and Hack model. - Light transmission (LT): 15% mirror gold, 21% mirror cobalt, 18% mirror silver, 21% mirror crimson, 43% mirror rose, 43% mirror clear - Pre-molded, cylindrically formed - Reflective mirror coating - Anti-fog - Anti-scratch - UV360-380mm

The iXS clear lens is UV protected and offers a clear unobstructed vision and eye protection. Compatible with iXS Trigger and Hack model. Light transmission (LT): 89% - UV360-380mm - Material composition: 100% Polycarbonate

The iXS mirrored lenses are UV protected. A large variety of colors, coatings and tints provide best flexibility for any light condition. Compatible with iXS Trigger and Hack model. - Light transmission (LT): 15% mirror gold, 21% mirror cobalt, 18% mirror silver, 21% mirror crimson, 43% mirror rose, 43% mirror clear - Pre-molded, cylindrically formed - Reflective mirror coating - Anti-fog - Anti-scratch - UV360-380mm

The iXS mirrored lenses are UV protected. A large variety of colors, coatings and tints provide best flexibility for any light condition. Compatible with iXS Trigger and Hack model. - Light transmission (LT): 15% mirror gold, 21% mirror cobalt, 18% mirror silver, 21% mirror crimson, 43% mirror rose, 43% mirror clear - Pre-molded, cylindrically formed - Reflective mirror coating - Anti-fog - Anti-scratch - UV360-380mm

The iXS mirrored lenses are UV protected. A large variety of colors, coatings and tints provide best flexibility for any light condition. Compatible with iXS Trigger and Hack model. - Light transmission (LT): 15% mirror gold, 21% mirror cobalt, 18% mirror silver, 21% mirror crimson, 43% mirror rose, 43% mirror clear - Pre-molded, cylindrically formed - Reflective mirror coating - Anti-fog - Anti-scratch - UV360-380mm

The Hack goggle was developed and tested in close cooperation with iXS athletes. Its outstanding peripheral vision makes this goggle one of a kind. The Hack features a simple lens handling ans a large variaty of lenses. - Wide field of view, unobstructed pereferal vision (178°x78°) - 2ply foam for increased comfort - 40mm elastic strap - EN1938:2012 - Lenses: Mirrored lens, anti fog, anti scratch Material composition: - Lens: 100% Polycarbonate / Frame: 47% Thermoplastic Polyurethane, 20% Polyester, 15% Polycarbonate, 6% Polyurethane, 3% Polyamide 6, 2% Elastane, 2% Silicone - INFO: Hack can be upgraded with Tear-Off kit. Lenses of Hack series are the same as Trigger series and are compatible with each other.

The iXS mirrored lenses are UV protected. A large variety of colors, coatings and tints provide best flexibility for any light condition. Compatible with iXS Trigger and Hack model. - Light transmission (LT): 15% mirror gold, 21% mirror cobalt, 18% mirror silver, 21% mirror crimson, 43% mirror rose, 43% mirror clear - Pre-molded, cylindrically formed - Reflective mirror coating - Anti-fog - Anti-scratch - UV360-380mm

Sunny, cloudy or that low-light forest shade, the Trigger goggle offers outstanding peripheral vision and a range of lens options to ensure you have the clarity you need when out ripping trails. With easy lens removal, exchange and replacement, as well as iXS Roll-Off/Tear-Off compatibility, the Trigger goggle is fully equipped to keep the path ahead crystal clear. - Wide, unobstructed field of vision (178°x78°) - 3-ply foam for increased comfort - 45mm elastic strap - Outriggers with universal helmet compatibility - EN1938 certified Lenses: - Mirrored lens with anti-fog & anti-scratch treatment - Clear single lens NOTE: Trigger can be upgraded with Polarized lens or Roll-Off system

The iXS mirrored lenses are UV protected. A large variety of colors, coatings and tints provide best flexibility for any light condition. Compatible with iXS Trigger and Hack model. - Light transmission (LT): 15% mirror gold, 21% mirror cobalt, 18% mirror silver, 21% mirror crimson, 43% mirror rose, 43% mirror clear - Pre-molded, cylindrically formed - Reflective mirror coating - Anti-fog - Anti-scratch - UV360-380mm

Sunny, cloudy or that low-light forest shade, the Trigger goggle offers outstanding peripheral vision and a range of lens options to ensure you have the clarity you need when out ripping trails. With easy lens removal, exchange and replacement, as well as iXS Roll-Off/Tear-Off compatibility, the Trigger goggle is fully equipped to keep the path ahead crystal clear. - Wide, unobstructed field of vision (178°x78°) - 3-ply foam for increased comfort - 45mm elastic strap - Outriggers with universal helmet compatibility - EN1938 certified Lenses: - Mirrored lens with anti-fog & anti-scratch treatment - Clear single lens - NOTE: Trigger can be upgraded with Polarized lens or Roll-Off system

Sunny, cloudy or that low-light forest shade, the Trigger goggle offers outstanding peripheral vision and a range of lens options to ensure you have the clarity you need when out ripping trails. With easy lens removal, exchange and replacement, as well as iXS Roll-Off/Tear-Off compatibility, the Trigger goggle is fully equipped to keep the path ahead crystal clear. Information to this specific option: LP (Low Profile) explains the low profile of this goggle version. Its circumference is reduced by about 5mm and therefore compensates a smaller head to ensure the goggle fits trough the helmet opening and fits properly. - Wide, unobstructed field of vision (178°x78°) - 3-ply foam for increased comfort - 45mm elastic strap - Outriggers with universal helmet compatibility - EN1938 certified Lenses: - Mirrored lens with anti-fog & anti-scratch treatment - Clear single lens - NOTE: Trigger can be upgraded with Polarized lens or Roll-Off system

- Polarized, mirrored lens - Clear double lens, clear single lens - Wide field of view, unobstructed pereferal vision - 3-ply foam for increased comfort - 45 mm elastic strap - Outriggers allow for perfect fit on div. helmets - EN1938, ASTM F2812-12 (moto certified) - Can be retrofitted with the roll-off/tear-off set

This additional On-Off Elbow can be used to add a second outlet valve to your RoadShower, making it easier to add accessories. Product Details - Attaches easily to the extra 1/2" outlet port on the RoadShower for water access on both ends. - Elbow includes a shut-off valve that can be used to regulate water outlet pressure for different uses. - Allows you to attach the RoadShower hose or any other garden hose. - Makes it easy to switch the hose to either end, or to add the shower head accessory. - Limited One Year Warranty

Nothing puts a damper on an adventure more than a ticket. That's why we designed the PlateMate to ensure your plate stays visible on your vehicle. It's the perfect accessory for any rear-of-car rack—simply attach it with the provided hook-and-loop straps to display your plate. Prevent any hiccups on the road, and avoid handing over your hard-earned money to the man. Product Details - Keeps your license plate visible - Attaches to a bike or rack to easily display your license plate - Fits all US and Canada plates Product Specs - Weight: 0.47 lbs. - Dimensions: L 13.00 in x W 0.12 in x H 7.50 in - Limited Lifetime Warranty

Bring the luxury of a shower to the outdoors by upgrading your RoadShower with this flexible shower head attachment. Connect it to the included outlet elbow, or to a second on/off elbow (sold separately). Product Details - Available in 19" & 30" lengths. - Attaches to the on/off elbow on the RoadShower with quick connect hardware for easy install and removal. - Flexible neck and variable shower head for the perfect shower. - The shower nozzle is low flow with high pressure to efficiently use stored water. - Limited One Year Warranty

Bring the luxury of a shower to the outdoors by upgrading your RoadShower with this flexible shower head attachment. Connect it to the included outlet elbow, or to a second on/off elbow (sold separately). Product Details - Available in 19" & 30" lengths. - Attaches to the on/off elbow on the RoadShower with quick connect hardware for easy install and removal. - Flexible neck and variable shower head for the perfect shower. - The shower nozzle is low flow with high pressure to efficiently use stored water. - Limited One Year Warranty

Easily attaches to your trailer to keep it from tipping down when not attached to your hitch. - Conveniently attaches to the tongue and keeps your trailer level when un-hitched Product Specs: - Weight: 2.20 lbs. - Limited One Year Warranty

Level up with the TentKit, designed to convert the EasyRider trailer to a stand-alone tent platform. When used as a SkyRise Tent platform, this required TentKit creates an even surface to ensure the trailer stays put. Two adjustable jack stands and two sets of wheel chocks provide support and stability so you can sleep in all-night outdoor comfort. Product Details: - Creates a stable platform for the SkyRise tent on the EasyRider Trailer - Two jack stands support the trailer - Mounts right to the trailer and is easy to use Product Specs: - Weight: 30.00 lbs

Be prepared with this spare tire and wheel designed for all RACKandROLL trailers. The spare features a black hubcap and all mounting hardware needed. Keep the road trip alive and well. - Spare tire and wheel for Yakima RACKandROLL trailers - Includes a black hubcap and mounting hardware Product Specs: - Weight: 16.31 lbs. - Dimensions: L 23.00 in x W 3.25 in x H 16.00 in - Limited One Year Warranty

Turn your 66" trailer into a 78" trailer. Widen your 66" wheel track and Crossbars by 13" with this kit. With 78" Crossbars you can carry wider loads, such as two 36-inch beam canoes or up to seven kayaks. - Upgrade your RACKandROLL 66" trailer to a 78" trailer - Comes with two 78" Crossmembers and two 78" Yakima Crossbars Product Specs: - Weight: 17.31 lbs. - Limited One Year Warranty

Never be forced to choose between your favorite activities and gear. Maximize your gear hauling choices by adding a sturdy, lightweight trailer. The RACKandROLL trailer is made of lightweight aluminum and offers a stable, secure ride for all your gear. Stores easily upright in the off-season. - Lightweight aluminum construction - Shock absorbers provide 4" of independent wheel travel, providing greater stability and gear protection - Stores easily in compact upright position with removable wheels and tongue - Small wheels on rear of trailer allow you to easily roll the trailer upright for storage - Carrying capacity is 250 lbs with stock suspension. - Carrying handle transforms lightweight trailer into a handcart - Includes Yakima crossbars; spread adjustable to 48" - LED trailer lights last years without needing replacement Product Specs: - Weight: 150.00 lbs. - Dimensions: L 132.00 in x W 66.00 in x H 22.00 in - Limited One Year Warranty

Never be forced to choose between your favorite activities and gear. Maximize your gear hauling choices by adding a sturdy, lightweight trailer. The RACKandROLL trailer is made of lightweight aluminum and offers a stable, secure ride for all your gear. Stores easily upright in the off-season. - Lightweight aluminum construction - Shock absorbers provide 4" of independent wheel travel, providing greater stability and gear protection - Stores easily in compact upright position with removable wheels and tongue - Small wheels on rear of trailer allow you to easily roll the trailer upright for storage - Carrying capacity is 250 lbs with stock suspension. - Optional Heavy-Duty Shocks can carry up to 350 lbs (RACKandROLL 78" only) - Carrying handle transforms lightweight trailer into a handcart - Includes Yakima crossbars; spread adjustable to 48" - LED trailer lights last years without needing replacement Product Specs: - Weight: 160.00 lbs. - Dimensions: L 132.00 in x W 78.00 in x H 22.00 in - Limited One Year Warranty

Our 2437 open bore adapter is used to press 24x37 sealed bearings into bottom bracket cups, and direct fit frames like trek BB90. The adapter is machined with one step at 24mm ID, which fits into the center of the sealed bearing. - Installs: 24x37 bearing - Inner step outer diameter: 23. 8mm - Outer diameter: 36. 8mm - Thru hole diameter: 0. 387" (9. 8mm) - Inner hole sized to fit 1/2" threaded rod - Compatible with BP0006, BP0007 - Machined, red anodized aluminum - Sold individually (2 drifts required for some installations)

Our 6806 open bore adapter is used to press 42x30 sealed bearings. The adapter is machined with one step at 30mm ID, which fits into the center of the sealed bearing. Common bearing size for BB30 frames and bottom brackets. - Installs: 6806 bearing - Inner step outer diameter: 29. 9mm - Outer diameter: 41. 8mm - Thickness: 7mm - Thru hole diameter: 0. 387" (9. 8mm) - Inner hole sized to fit 1/2" threaded rod - Compatible BP0006, BP0007 - Machined, red anodized aluminum - Sold individually (2 drifts required for some installations)

Our GXP-LEFT open bore adapter is used to press 22x37 sealed bearings into SRAM GXP bottom bracket cups and direct fit frames like trek BB90. The adapter is machined with one step at 22mm OD, which fits into the center of the sealed bearing. - Installs: 22x37 (GXP) bearing - Inner step outer diameter: 21. 9mm - Outer diameter: 36. 8mm - Thickness: 7mm - Thru hole diameter: 0. 387" (9. 8mm) - Inner hole sized to fit 1/2" ACME threaded rod - Compatible with BP0006, BP0007 - Machined, red anodized aluminum - Sold individually

Designed to press in all current wheels mfg bottom brackets! our universal bottom bracket frame drift is designed to press all current wheels mfg bottom bracket cups in to your frame. The adapter is machined with multiple steps to fit common bottom bracket shell inside diameters listed in the compatibility tab below. Each step is laser etched with the diameter size. Drift can also can be used as a frame bottom bracket shell sizing guide! - Inner hole sized to fit 1/2" threaded rod. (Not for use with our Press-1 or Press-4 ) - Compatible with any other press with a 1/2" diameter rod - Recommended for use with Wheels Mfg BP0006, BP0007 - Machined aluminum - Anodized red - Sold individually We do not recommend it for use with press with a rod diameter less than 1/2". When used with a smaller rod, it is almost impossible to prevent the cups or bearings from pressing in straight.

The Wheels Manufacturing universal bottom bracket drift presses all current Wheels Mfg bottom bracket cups into your frame or bearing cups. The adapter is machined with multiple steps to fit common bottom bracket shell and bearing diameters listed below. Each step is laser etched with the diameter size. - Inner hole sized to fit 1/2" threaded rod. Not for use with Wheels Mfg PRESS-1 or PRESS-4 - Compatible with any other press with a 1/2" diameter rod - Recommended for use with Wheels Mfg Universal BB Press - Machined aluminum - Anodized Red - Sold individually - Drift can also be used as a frame bottom bracket shell sizing guide! Fits the following bottom bracket shell sizes: - BB30 (42mm) - PF30 (46mm) - BB86, BB92 (41mm) - BBRight (46mm) - BB386EVO (46mm) - Cannondale BB30A (42mm) - Cannondale PF30A (46mm) - Specialized Carbon OSBB (46mm) - Specialized Alloy OSBB (42mm) - TREK BB90, BB95 (37mm) - PF24 (41mm)

Wheels Manufacturing open bore adapters are used to press sealed cartridge bearings into place. The adapters are machined with one step to correspond to the bearing OD, which fits in to the center of the sealed bearing and an outside diameter to accommodate the bearing's outer diameter. Size: [Bearing inner diameter] x [Bearing outer diameter] Note: If only one dimension is given, that is the outer diameter of the adapter, with no inner diameter step

Wheels Manufacturing Over Axle Adapters are used for pressing your most commonly used bearing sizes into place. Each represents an excellent addition to the Press-4 Bearing Press. - Adapters sold individually

Precision-machined anodized aluminum designed to allow for easy adjustment of the Fox DHX2/FLOAT X2 shocks requiring a 3mm and 6mm hex wrench. This small, pocket-sized tool allows for easy trail-side adjustments.

Light-duty zip tie - 200mm length x 2.5mm - Bag of 100

This 29mm open bore adapter is used to press 29mm x 42mm (DUB) sealed bearings. The adapter is machined with one step at 29mm OD, which fits into the center of the sealed bearing. For use with Wheels Mfg. bottom bracket press (PRESS-7 , PRESS-7-PRO or PRESS-9-PRO). - Inner step outer diameter: 28.9mm - Outer diameter: 41.8mm - Thru hole diameter: 12.8mm (1/2-inch) - Thickness: 7mm - Machined, red anodized aluminum - Sold individually

The Bottom Bracket Gauge Tool was designed to provide all the necessary measurements to identify the proper bottom bracket for a specific bike configuration. A metric scale runs along the long edges for measuring bottom bracket shell width and crank spindle lengths. Durable red anodized aluminum with laser etching. Overall size is 7" x 3" x 0.125". The gauge can measure: - bottom bracket width - bottom bracket shell inner diameter - crank spindle length - crank spindle diameter - bearing inner diameter Specifications: Measures crank spindle diameters: 22mm, 24mm, 29mm, 30mm Measures bearing inner diameters: 22mm, 24mm, 29mm, 30mm Measures bottom bracket shell inner diameters: 37mm, 41mm, 42mm, 46mm Measures bottom bracket shell widths: 61mm, 68mm, 73mm, 79mm, 86.5mm, 90mm, 92mm, 95mm, 100mm, 120mm, and 132mm Measures crank spindle lengths up to 180mm

Reusable zip ties - 200mm long x 7.4mm wide - 100 pieces

BB30 service kit for SRAM DUB cranks. - Includes (2) Enduro 6806/29 ABEC-3 sealed bearings and 2 retaining clips - Bearing Dimensions: OD: 42mm / ID: 29mm / Width: 7mm - Enduro ABEC-3 bearings - Use with SRAM DUB cranks Note: SRAM DUB cranksets are not designed to work in 68mm or 73mm wide shells with inboard bearings. Use only if your frame is a direct-fit bearing system, and the BB shell width is 86.5mm or wider.

- Machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. - Precision machined aluminum body. - Anodized in Wheels MFG red.

- Machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. - Precision machined aluminum body. - Anodized in Wheels MFG red.

This Wheels Mfg. Double End Bottom Bracket wrench fits 16-notch bearing cups with an outside diameter of 44mm as well as 16-notch bearing cups with an outside diameter of 48.5mm. - Machined aluminum - Anodized red. - Compatible with all current Wheels Mfg bottom brackets with notched cups

Wheels Manufacturing Sealed Bearing Extractor - 10mm Fits the following bearings: - 6000 - 6200 - 6800 - 6900

Wheels Manufacturing Sealed Bearing Extractor - 12mm Fits the following bearings: - 6001 - 6801 - 6901

Wheels Manufacturing Sealed Bearing Extractor - 15mm Fits the following bearings: - 6002 - 6702 - 6802 - 6902 - 15267 - 15268

Wheels Manufacturing Sealed Bearing Extractor - 17mm Fits the following bearings: - 6003 - 6803 - 6903 - 17287

Wheels Manufacturing Sealed Bearing Extractor - 8mm Fits: - 608 - 688 - Other bearings with an inside diameter of 8mm

Wheels Manufacturing Sealed Bearing Extractor - 9mm Fits: - 609 - 9227 - Other bearings with an inside diameter of 9mm

- Machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. - Precision machined aluminum body. - Anodized in Wheels MFG red.

- Machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. - Precision machined aluminum body. - Anodized in Wheels MFG red.

Thin flange bottom bracket socket designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames. This single-sided socket is used for installing and removing 48.5mm, 16-notch bottom bracket cups. The socket has a machined 3/8" drive, which can be used to allow 3/8" drive torque wrenches to be attached and locks onto 1/2 inch unc press rod for secure and easy installation of thin flanged bottom brackets. Machined 6061 aluminum anodized red

Wheels Manufacturing Sealed Bearing Extractor - 10mm Fits the following bearings: - 6704 - 6804 - 6904

Wheels Manufacturing Sealed Bearing Extractor for 24 x 37mm bearings Fits: - 2437 (Shimano Hollowtech II-compatible outboard bottom bracket bearings) - Other bearings with an inside diameter of 24mm

Wheels Manufacturing Sealed Bearing Extractor - 30mm Fits: - 6806 - Other bearings with an inside diameter of 30mm

Wheels Manufacturing, Zip Ties, Jar of 600, Black

- Machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. - Precision machined aluminum body - Anodized in Wheels MFG red.

- SRAM Thin Flange T47 Bottom Bracket Socket Designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames. - This single-sided socket is used for installing and removing 52mm, 16-notch bottom bracket cups. - The socket has a machined 3/8" drive, which can be used to allow 3/8" drive torque wrenches to be attached and locks onto a 1/2 inch UNC press rod for secure and easy installation of thin flanged bottom brackets. - Machined 6061 Aluminum Anodized Red

- Allows for quick and accurate positioning at the press of a button - Slides along 1/2" UNC threaded press rod when the button is depressed and can be placed quickly to secure drifts, spacers, and cups when completing maintenance or installation of bike headsets, bottom brackets, and bearings

- Machined to match manufacturer specifications and designed to be used with a 1/2" drive socket or torque wrench for easy installation and removal of e-bike lockrings. - Precision machined aluminum body. - Anodized in Wheels MFG red.

- Headset drift for sealed bearing installation press - Drift is machined with steps to press in headset cups that use either 1-1/8" or 1-1/2" bearings, but may be used for other cups with odd-sized sealed bearings - Compatible with bearing presses using 1/2" diameter rod, such as Wheels Mfg Headset Cup Press (PRESS-8)

Headset drift for sealed bearing installation press. - Drift is machined with multiple steps to fit common head tube inner diameters - Compatible with bearing presses using 1/2" diameter rod, such as the Wheels Mfg. Headset Cup Press (PRESS-8) - Fits the following headtube inner diameters: 34mm, 44mm, 49mm, and 56mm

- Similar to its big brother but at a fraction of the size. The new and more efficient Adjustable Press Stop Mini will make life easier for mechanics as it allows for quick and accurate positioning in places where space is tight at the press of a button. - Adjustable Press Stop slides along 3/8" ACME threaded press rod when the button is depressed and can be placed quickly to secure drifts, spacers, and cups when completing maintenance or installation of bike headsets, bottom brackets, and bearings. - Compatible with new and existing Wheels MFG press kits which utilize a 3/8" ACME threaded rod - Compatible kits include: Press-4, ST0006, Press-1 - Machined aluminum body - Anodized in Wheels MFG red. - Durable steel button - For use with 3/8" ACME threaded press rod (Sold Separately)

The dropout saver system is an alternative to replacing badly bent or damaged derailleur dropouts. Rather than replacing the damaged dropout completely, simply drill out the damaged threads, install a dropout saver, and realign the dropout. Kit includes: - (1) 15/32-inch reduced shank drill bit - (2) DS-1 wide dropout savers     - (3) DS-2 narrow dropout savers    

- Essential bearing press for installation of bearings with a 10mm minimum ID - (1) 3/8 ACME threaded rod, (2) 30mm standoffs, (2) threaded handles