Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Accessories

$4,999.99
Never be forced to choose between your favorite activities and gear. Maximize your gear hauling choices by adding a sturdy, lightweight trailer. The RACKandROLL trailer is made of lightweight aluminum and offers a stable, secure ride for all your gear. Stores easily upright in the off-season. - Lightweight aluminum construction - Shock absorbers provide 4" of independent wheel travel, providing greater stability and gear protection - Stores easily in compact upright position with removable wheels and tongue - Small wheels on rear of trailer allow you to easily roll the trailer upright for storage - Carrying capacity is 250 lbs with stock suspension. - Optional Heavy-Duty Shocks can carry up to 350 lbs (RACKandROLL 78" only) - Carrying handle transforms lightweight trailer into a handcart - Includes Yakima crossbars; spread adjustable to 48" - LED trailer lights last years without needing replacement Product Specs: - Weight: 160.00 lbs. - Dimensions: L 132.00 in x W 78.00 in x H 22.00 in - Limited One Year Warranty
$4,599.99
Never be forced to choose between your favorite activities and gear. Maximize your gear hauling choices by adding a sturdy, lightweight trailer. The RACKandROLL trailer is made of lightweight aluminum and offers a stable, secure ride for all your gear. Stores easily upright in the off-season. - Lightweight aluminum construction - Shock absorbers provide 4" of independent wheel travel, providing greater stability and gear protection - Stores easily in compact upright position with removable wheels and tongue - Small wheels on rear of trailer allow you to easily roll the trailer upright for storage - Carrying capacity is 250 lbs with stock suspension. - Carrying handle transforms lightweight trailer into a handcart - Includes Yakima crossbars; spread adjustable to 48" - LED trailer lights last years without needing replacement Product Specs: - Weight: 150.00 lbs. - Dimensions: L 132.00 in x W 66.00 in x H 22.00 in - Limited One Year Warranty
$2,114.99
- AXS enabled for easy monitoring and firmware upgrades - Fully integrated power meter into a direct mount chainring - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - 8-bolt direct mount compatibility only to RED and Force eTap AXS cranks. - Speeds: 12 - Chainring material: Aluminum - Power Meter Type: ANT USB
$1,879.99
In certain disciplines, the single-ring drivetrain reigns supreme. Championing simplicity, strength and durability, the SRAM RED 1 AXS power meter meets the demands of triathletes, time trialists and cyclocross racers. The power meter features improved aerodynamics thanks to direct mount aero chainrings with fully integrated power, and the tighter gearing range is perfect for racing and flatter terrains. - Single-ring drivetrain simplifies functionality - 48T and 50T variants have fully integrated power into a direct mount aero chainring - 36-46T variants have spider-based power - Chainrings can be easily changed without requiring recalibration of the power meter - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - DUB bottom bracket adds durability and simplicity - Non-aero chainrings can be installed with a single tool, making gearing changes a breeze - Bottom bracket not included - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE
$1,879.99
The SRAM RED AXS power meter breaks with tradition — and breaks through to new levels of performance. SRAM reengineered road gearing: reducing front chainring size and adding more range to the rear cassette. They also maintained a 13-tooth delta on all chainring pairs, ensuring precise shifting for any setup. This results in more useful gearing and better shifting across all configurations. These power meters are also designed with Quarq's premier DZero power measurement technology fully integrated into the crankset. Welcome to the pinnacle of the power meter. - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Integrated power measurement - Power meter is fully integrated into the chainring set for lighter weight - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Improved front shifting performance for crisp and accurate front shifts - Unique chainring shape results in a lighter weight, stiffer, more durable crankset - Integrated chainring design significantly reduces weight - DUB bottom bracket adds durability, simplicity and broad compatibility - Speeds: 12 - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE - Bottom bracket not included
$1,879.99
With the addition of lightning fast WiFi, KICKR continues to stay ahead of the pack as the smart trainer that gives you the most ways to connect, compete and train indoors. - +/- 1% power accuracy - Side-to-side movement - Auto-calibration and firmware updates - Virtually silent operation - Measures speed, distance, power and cadence data - NEW - WiFi connectivity for faster, stable data transfer - NEW - ERG Easy Ramp gets you back in action - NEW - Odometer tracks total mileage
$1,429.99
Rally RS200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to ensure total reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes. - Advanced Cycling Dynamics—In addition to total power and cadence, Rally RS200 measures much more. These metrics help you tailor your training around your specific weaknesses and strengths to help you improve. - Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power. - Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness. - Power Phase—Get a clear look at where you're producing power in the pedal stroke. - Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal. - Cleat Compatibility—For a comfortable ride, these pedals are designed with your favorite Shimano SPD-SL cleats in mind. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round. A transferable spindle can be installed in Rally RS road or Rally XC off-road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 320g - Water resistance: IPX7 - Cleat type: SPD-SL - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RS200 pedals - Cleat hardware - 55mm Q-factor washers - Documentation
$1,399.99
The PK-5 includes over 90 of our best shop tools selected with versatility in mind. A great way to outfit a pro bench or to set up a dream home workshop. The PK-5 is an impressive, professional set of specialty tools that can help you perform hundreds of bicycle repair and maintenance procedures. An investment you'll use and appreciate for decades. Kit Includes: - ATD-1.2 Adjustable Torque Driver - AWS-1 Three-Way Hex Wrench Set: 4, 5, 6mm - AWS-3 Three-Way Hex Wrench Set: 2, 2.5, 3mm - BBT-10.2 Adjusting Cap Tool: For 8-Spline Hollowtech II - BBT-22 Bottom Bracket Tool - BBT-69.2 Bottom Bracket Tool - BO-2 Bottle Opener - CBW-1 Open End Wrench: 8/10mm - CBW-4 Open End Wrench: 9/11mm - CC-4 Chain Checker - CN-10 Professional Cable and Housing Cutter - CNW-2 Chainring Nut Wrench - CP-1.2 Cassette Pliers - CT-3.3 Chain Tool - CWP-7 Compact Universal Crank Puller - DAG-2.2 Derailleur Hanger Alignment Gauge - DH-1 Dummy Hub - DP-2 Threaded Dummy Pedal - DSD-2 Derailleur Screwdriver: Cross Tip - DSD-4 Derailleur Screwdriver: Flat Blade - DT-2 Rotor Truing Fork - FR-5.2H Cassette Lockring Tool with Handle - GSC-1 GearClean Brush - HMR-8 8 oz. Shop Hammer - HXS-1.2 Hex Wrench Set - MLP-1.2 Master Link Pliers - NP-6 Needle Nose Pliers - PAW-6 6" Adjustable Wrench - PH-1.2 P-Handle Hex Wrench Set - PW-4 Professional Pedal Wrench - RR-12 Tape Measure - SBC-1 Spoke, Bearing and Cotter Gauge - SBS-1.2 Socket and Bit Set - SCW-13 13mm Shop Cone Wrench - SCW-14 14mm Shop Cone Wrench - SCW-15 15mm Shop Cone Wrench - SCW-16 16mm Shop Cone Wrench - SCW-17 17mm Shop Cone Wrench - SCW-18 18mm Shop Cone Wrench - SCW-19 19mm Shop Cone Wrench - SP-7 Side Cutter Pliers - SW-0 Precision Spoke Wrench: .127" - SW-2 Precision Spoke Wrench: .136" - SWR-8 3/8" Drive Ratchet Handle - SZR-1 Shop Scissors - TL-1.2 Tire Lever Set - TL-4.2 Tire Lever Set - TL-6.2 Steel Core Tire Levers - TWS-1 Torx Compatible Wrench Set - UP-SET Utility Pick Set - VC-1 Valve Core Tool - ZP-5 5" Flush Cut Pliers
$1,334.99
A professional level tool set designed and built for portability. The EK-3 is perfect for team and event mechanics or the home mechanic who wants the ultimate portable tool kit. Neatly organized in Park Tool's world-famous BX-2.2 Blue Box Tool Case, this tool kit features 56 of their best tools to do hundreds of repair and maintenance tasks. Plus, the bomb-proof Blue Box features pockets, pouches, straps and open space to add more tools and parts! Kit Includes: - ATD-1.2 Adjustable Torque Driver - AWS-1 Three-Way Hex Wrench Set: 4, 5, 6mm - BBT-9 Bottom Bracket Tool for 16-Notch External Bearing Cups - BBT-32 Bottom Bracket Tool for 20 Notch Shimano and ISIS Drive - BO-2 Bottle Opener - CC-4 Chain Checker - CN-10 Professional Cable and Housing Cutter - CNW-2 Chainring Nut Wrench - CP-1.2 Cassette Pliers - CT-3.3 Chain Tool - CWP-7 Compact Universal Crank Puller - DCW-1 Double-Ended Cone Wrench: 13/14mm (2) - DCW-2 Double-Ended Cone Wrench: 15/16mm (2) - DCW-3 Double-Ended Cone Wrench: 17/18mm - DSD-2 Derailleur Screwdriver: Cross Tip - DSD-4 Derailleur Screwdriver: Flat Blade - DT-2 Rotor Truing Fork - FR-5.2H Cassette Lockring Tool with Handle - GSC-1 GearClean Brush - HCW-15 36mm/32mm Headset Wrench - HMR-8 Shop Hammer - HT-8 8mm Hex Tool - HXS-1.2 Hex Wrench Set - LP-7 Utility Pliers - MLP-1.2 Master Link Pliers - MW-8 Metric Wrench: 8mm - MW-9 Metric Wrench: 9mm - MW-10 Metric Wrench: 10mm - PAW-12 12" Adjustable Wrench - PW-4 Professional Pedal Wrench - RR-12 Tape Measure - SW-0 Precision Spoke Wrench: .127" - SW-2 Precision Spoke Wrench: .136" - SZR-1 Shop Scissors - TL-6.2 Steel Core Tire Levers - TWS-1 Torx Compatible Wrench Set
$1,221.99
Reach new goals and explore new roads with a power meter that delivers on accuracy, durability, and reliability. The Quarq DZero DUB Power Meter is paired with the Quarq DUB Crankarms and SRAM’s X-Glide 52/36t chainrings to have the perfect fit for most 10- or 11- speed groupsets. A SRAM DUB Bottom Bracket will be required for installation. FEATURES - Bluetooth low energy technology and ANT+ wireless data transfer - MagicZero - automatically checks and recalibrates your power meter as you ride – no need to manually calibrate - AxCad -- no cadence magnet required - 10K Temperature Compensation - Battery -- CR2032, 200-hour battery life, change without tools - OmniCal -- swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy -- within 1.5%, measuring both legs. SPECIFICATIONS - Speeds: 11 - Crank arm length: 170mm, 172.5mm, 175mm - BB Compatibility: All SRAM Road DUB BBs - Chainring Size: 52/36T - Bolt Circle Diameter (BCD): 110 BCD - Chainline: n/a - BB Spindle Interface: DUB - Chainring material: Aluminum/Aluminum - Guard: No Guard - Crank arm material: Carbon - Color (Crank arm): Natural carbon - Power Meter Type: Spider
$1,049.99
Built to withstand the punishment of travel and constant use and molded from impact resistant polypropylene, the BX-3 features pallets with 70% more surface area than the BX-2.2. Easily transportable with the integrated wheels and extendable handle, this case was designed with the help of some of the world's best mechanics for optimal form, function and longevity. - Smooth rolling integrated wheels - Extendable handle - Dust and water resistant - Air pressure compensation valve - Custom designed tool-holding pallets with loops and pockets - Gas assisted lid struts for easy opening - Dual-sided upper and mid level folding pallet wings - Front tool pallet that stores safely inside during transport - Nominal dimensions: 23.4" x 17.3" x 9.3" (59.5 cm x 44 cm x 23.5 cm), 21.6 lbs. (9.8 kg)
$1,046.99
The Bosch PowerPack 500 is the same size as the PowerPack 400 and only slightly heavier, but offers a longer range. When using the Bosch Standard Charger, this lithium-ion battery requires about two hours to charge to 50% and approximately 4.5 hours to charge fully. Once fully charged and together with the Performance Line Cruise, the eBike can ride up to 56 miles. The PowerPack 500 comes as a frame or rack model for all eBike product lines.
$999.99
Proper frame preparation is very important. Park Tool's Head Tube Reaming and Facing Set (33.8mm reamer) combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. The HTR-1B comes with a reamer of 33.9mm for the 1-1/8 inch headset standard. Includes: • 33.9mm reamer (part #754.2), and four different size pilots (29.8mm, 30.0mm, 33.8mm, and 36.8mm) • 690 Facer • Quick-release, quick-adjust feature: bottom portion slides off and on easily without threading SHIS terminology: The HTR-1B as stock will face frames of EC29, EC30, EC34 and EC37. It will ream frames of EC34. Accessories will allow service in other standards.
$999.00
Park Tool's Bottom Bracket Tapping & Facing Set is a precision tool system which provides a piloted means of tapping the threads in the bottom bracket shell of a frame. After tapping, the taps act as guides to keep the included facing cutter perfectly square with the axis of the bottom bracket for cleanup of the faces of the bottom bracket shell. The BTS-1 includes English taps, 1.370" x 24 TPI right hand thread for the adjustable cup, and 1.370" x 24 TPI left hand thread for the fixed cup. Italian thread taps, 36mm x 24 TPI right hand thread (Part #693) for the adjustable and fixed cups, are available as accessories.
$939.99
Enjoy the ultimate advantage of freedom and adventure that Eagle provides combined with the Quarq power meter platform that delivers on accuracy and reliability. The SRAM Eagle XX1 power meter is built to pair with the SRAM Eagle drivetrains, providing a significantly quieter performance and extraordinary durability. Take it on the dirtiest, gnarliest trails while maintaining confidence in your cycling components. You came to perform; the Eagle XX1 power meter will perform with you. You are working hard, pushing yourself to new heights in some of the toughest conditions. Ride with confidence knowing that your power meter will not quit when you need it the most. Enjoy up to 200 hours of ride time in any weather or trail condition with its IPX7 waterproof rating and 10k temperature compensation; if harsh environments do not hold you back, then you need a product capable of rising to the occasion. The Eagle XX1 power meter is designed to be rough-and-tumble tough. Train harder, ride faster and unlock your ultimate potential. The Eagle XX1 power meter brings simplicity and ease-of-use to your training. With MagicZero automatic calibration, there is no need to worry about calibrating before you ride; just jump on your bike and go. The Eagle XX1 also features Bluetooth low energy and ANT+ wireless data transfer, delivering power output information directly to your cycling computer. - Speeds: 11/12 - BB Compatibility: DUB:BSA73, PF89.5, PF92, PF30 MTB73, BB30 MTB73, BSA MTB68SP - Bolt Circle Diameter (BCD): 104 BCD - Chainline: 52.0mm - BB Spindle Interface: DUB - Power Meter Type: ANT+ and BLE - Crank Arms/Chainrings not included
$909.99
The standard of the bike industry for over 40 years, the PRS-2.3 clamps two bikes and rotates horizontally 360 degrees, allowing one bike to be swung out of the way to work on another. Stand height and clamp position are firmly secured in place using our proven lock block system. Built from heavy-gauge oversized steel tubing, then chrome plated and powder coated for years of carefree use. The PRS-2.3-1 features our 100-3C Adjustable Linkage Clamps, with a time-tested design and straightforward operation. - Maximum weight capacity: 120 lbs. (54 kg) - Clamp capacity: 0.875" to 1.625" (22–41 mm) diameter tubes - Clamp jaws are nominally 4" (100 mm) wide - Clamp height: adjustable from 50" to 62" (128–158 cm) - Includes #105 Cast Aluminum Work Tray & RPP-1 Repair Stand Post Protector - Can be installed onto the #135 Repair Stand Base or bolted directly to the floor using the FP-2 Floor Plate (both sold separately)
$899.99
- The PRS-2.3.1 is a professional quality double arm repair stand designed and built to withstand the rigors of everyday shop use. - Includes two 100-3D Micro Adjust Clamps (clamps tubes up to 3", fully adjustable clamping pressure, narrow 2.7" clamping jaws) - Clamps two bikes simultaneously - Clamps rotate 360 degrees horizontally and vertically - Heavy gauge, chrome plated steel tubing for rigidity and years of trouble free use - Clamping height easily adjusts from 50" to 62" (128cm to 158cm) using heavy duty lock block and locking pin system - Includes aluminum work tray - #135 Steel Base Plate sold separately - Use FP-2 Floor Mounting Plate to mount stand directly to floor (sold separately)
$847.99
Whether visiting friends, enjoying a ride on city roads, or doing some errands with the eBike, the PowerPack 400 delivers the power you need. The lightweight lithium-ion battery is easy to install and remove or can simply be charged using the charging socket on the eBike. Its long service life, compact and easy-to-install design mean that the PowerPack 400 is not only reliable, but also strong on performance. The PowerPack 400 comes as a frame or rack model for all eBike product lines.
$839.99
The DT-5.2 is engineered and built to accurately face front or rear disc brake mounts so they are precisely aligned to the rotor. - Faces any IS Mount, Post Mount, or new Shimano Flat Mount, including low clearance, chainstay mounts - Telescoping axle adaptors allow use with any configuration of open or thru-axle dropouts and dropout widths (including Boost 110, Boost 148 and all fat bike axles) - Includes two facing cutters: IS Mounts Post and Flat Mounts - Includes storage case
$799.99
The BBP-AOS is used in conjunction with the BBP-1.2 Bottom Bracket Bearing Press Kit to extract press fit bottom bracket bearings, cups, and adaptors. The BBP-AOS utilizes an expanding collet and extractor cup system to safely remove bearings without requiring impact. Also included are eight installation drifts for pressing bearings into pre-installed cups. - 8 precision-machined extractor cups and 5 hardened collets for compatibility with most bearing IDs and bearing/cup ODs - 8 installation drifts for standalone bearing installation - Organized in a convenient storage case - Full list of compatible bearing inner/outer diameters found on instructions/parts diagram NOTE: The BBP-AOS requires the BBP-1.2 Bottom Bracket Bearing Press Set for use. The BBP-1.2 and BBP-AOS are also available as a complete set (part # BBP-2).
$799.00
The SHX-1 Slide Hammer Extractor is a professional solution specifically designed for removing press fit cartridge bearings from bicycle components. Utilizing expanding collets, an extendable shaft, and a substantial (960g) slide hammer, the SHX-1 securely yet forcefully drives out cartridge bearings with targeted impact. The SHX-1 is compatible with cartridge bearings with inner diameters from 6 to 32 millimeters, covering most press fit applications found on bicycles including hubs, suspension linkages, and bottom brackets. - Set of 5 expanding collets covers most bicycle bearing IDs from 6mm to 32mm - Slide hammer shaft is extendable from 6.5" (165mm) to 13" (233mm) for additional force when needed - Organized in a convenient storage case
$794.99
- 150lb holding capacity - Includes work tray (#105) (900119-01) - Base not included (900706)
$779.99
Built to withstand the rigors of every day shop use, the PRS-3.3 is the stand of choice for professional mechanics around the world. Stand height and clamp position are firmly secured in place using our proven lock block system. Built from heavy-gauge oversized steel tubing, then chrome plated and powder coated for years of carefree use. The PRS-3.3-2 features our 100-3D Micro-Adjust Clamp with narrow clamping jaws and a dual-stage, cam-actuated system that quickly adjusts to accommodate nearly any seat tube or frame size. - Maximum weight capacity: 120 lbs. (54 kg) - Clamp capacity: 0.875" to 3" (22–76 mm) diameter tubes, including aero tubes - Clamp jaws are nominally 2.75" (70 mm) wide - Clamp height: adjustable from 50" to 62" (128–158 cm) - Includes #105 Cast Aluminum Work Tray & RPP-1 Repair Stand Post Protector - Can be installed onto the #130 Repair Stand Base or bolted directly to the floor using the FP-2 Floor Plate (both sold separately)
$749.99
Updated to fit an even wider range of hub, wheel and tire combinations with room to spare, utilizing a wider base structure and larger calipers. More accurate and easier to calibrate, the versatile TS-4.2 is solidly built to accurately self-center nearly any diameter wheel 16-inch to 29+ and any tire width up to 5-inches+. - Both uprights move simultaneously to always keep wheel centered in the stand - Accommodates tire widths up to 5-inches+ with or without brake rotor mounted - Speed knob to quickly change axle widths - Accommodates hub widths from 75mm to over 250mm - Precise operation and adjustability - Built in thru-axle adaptors - Machined, welded, assembled and calibrated in our factory in St. Paul, MN - Chrome plated and powder coated heavy gauge steel construction - Removable, replaceable nylon caliper tips to protect painted/anodized rims
$719.99
Park Tool's Event Stand is a versatile, stable, multi-purpose storage rack built to hold up to twelve bikes by the nose of the saddle. Perfect for events, races, or sidewalk storage, the ES-1 disassembles and folds easily for compact storage. It includes two height-adjustable tripod uprights, two 47" (119cm) support tubes, and one connector sleeve. The ES-1 is approximately eight feet long but can be extended in length with the use of ES-2 Event Stand Add on Kits (sold separately). - The ES-1 adjusts from 94 to 120cm (37"-47") - Horizontal width (inside to inside): 2.23 meters (87")
$701.99
- The HBP-1 is designed to quickly and accurately press bearings into a wide variety of cartridge bearing-type bicycle hubs. - Quick release design for fast tool installation and removal - Includes two bearing presses and precision machined aluminum pilots, bushings, and spacers - Works with more than 20 different cartridge bearing sizes and multiple axle configurations
$699.99
The PRS-4.2 is a professional quality bench mount repair stand designed and built to withstand the rigors of everyday shop use. Includes three mounting holes, making it possible to clamp as high as 16.25" (41cm) from the bench surface. - Shop quality 100-3C Clamp quickly adjusts to fit any frame tube up to 1-5/8" (41mm) - The clamp jaws are nominally 4 inches (10cm) wide - Clamping height can be raised from 6.5" to 16.25" (92cm to 41cm) above the bench surface - Clamp rotates 360 degrees - Heavy gauge steel tubing - Chrome plated for durability
$699.99
Park's Deluxe Home Mechanic Repair Stand is an awesome portable stand that's as useful while traveling as it is at home. This versatile stand features Park's shop-quality Micro-Adjust Clamp that handles round and aero seatposts and frames from 7/8-inch to 3-inches in diameter and clamps securely with its quick-release cam and handle that fine-tunes the tension. The clamp also has protective rubber jaws and built-in slots for cables. Plus its jaws are only 2.7 inches tall so they easily fit in narrow areas, like on seatposts that aren't raised much. The Deluxe Stand also boasts a stable base and the top telescopes for putting the bicycle right where you need it to get your work done efficiently. Plus, you can also rotate bicycles 360 degrees and the stand folds for easy carrying and storage.
$649.99
115 pound (52kg) base plate with floor levelers for the PRS-33 Power Lift Shop Stand
$649.00
Updated with a smoother, more solid rotation system! Originally designed for professional Pro Tour mechanics. The PRS-22.2 firmly holds any bike without clamping the frame or seat post by supporting the bottom bracket then locking either the front or rear dropouts. Works with any style axle system, including quick release and all sizes of thru-axles without cumbersome adaptors. Ideal for cleaning and general repair work, the PRS-22.2 features a solid tripod base and folds compactly for storage or transport. - Precisely constructed of anodized 6063 T6 lightweight aluminum and durable composites (12.5lbs, 5.67kg) - Adjustable BB height of 30" to 45" / 76cm to 114cm - 360 degree horizontal rotation allows easy access to all sides of the bike - Customizable bottom bracket supports accommodate a wide variety of BB shells - Main beam is adjustable fore and aft to customize balance points - Adjustable collar features receivers for optional accessories (sold separately) 106 Work Tray and PHT-1 Paper Towel Holder - Easily transported in the BAG-20 (sold separately)
Page 1 of 38 Next page