Accessories

A full-featured, waterproof urban-inspired pannier that overcomes limitations normally found with waterproof bags. Offers exceptional external load flexibility, a removeable internal organizer for a laptop, and a convenient external access zippered pocket for keys and/or phone. - OCEANWEAVE 600D reclaimed fishnet polyester with waterproof polyurethane coating. - HYDRACORE liner provides an exceptional IPX5 waterproof rating. - Rixen & Kaul VARIO 2 spring-loaded hooks immediately adjust from 6mm-16mm, without any need for tools. - Rixen & Kaul lower SLIDE-LOCK and FLIP-LOCK hold panniers firmly in place. - Intuitive waterproof roll-down closure system. - Removeable 14.2-inches x10.2-inches padded laptop/electronics sleeve/organizer. - External zippered pocket for keys/wallet, etc... - Keychain clip + Axiom keychain. - Compression/cargo straps provide exceptional load control and allow gear to be carried outside of the main cavity. Ideal for unplanned loads faced by commuters. - Strap control loops to protect against strap damage if straps are not secured. - Single daisy-chain tie-down strip for additional load attachment. - Ultra-visible three-way 3M triangle logos. - Ultra-stiff Polypropylene backing plate. - Front and rear light clips. - Carry handle. - D-Rings built in to hook attachment points for additional luggage tie-down, or for attaching your own shoulder strap. - Volume 22.6L / 1379 cu/in - Weight 935g / 2.06 lbs (incl. laptop sleeve and tablet sleeve) – (800g / 1.76 lbs without sleeve) - Dimensions 47x28.5x13.5cm / 18.5-inches x11.25-inches x5.25-inches - Pannier sold individually

- Bottom bracket and bearing installation kit - (1) 1/2" rod, (2) threaded handles - (1) 2237 OPEN BORE, (2) 2437 OPEN BORE, (2) 29mm OPEN BORE, (2) 6806 OPEN BORE, (1) FRAME DRIFT

- Hydroilo exterior surface coating. - Full range of interchangeable replacement lenses available for all light conditions. - Designed in California. - Produced in Italy. - CE and ANSI Certified.

• Foldable and adjustable repair stand • Lightweight Alloy construction • Incl. Carrier-bag and Tool-plate

It's fender season Our patented "No-Cut-Strut" bicycle fenders allow quick and simple installation to keep you dry and your bike clean. The premium aluminum construction provides added reliability and less vibration, while the sleek adjustable arms allow ultra-precise placement, so you can tailor the fit faster than you can pull a shot of espresso. Patented No-Cut-Strut alloy fenders provide durability and quick, easy installation. - Fully assembled fenders that install in minutes with only two tools - Durable no-cut alloy struts allow quick adjustment for proper tire clearance - Made of premium aluminum for added durability and reduced flexing and vibration - Double-back strut on rear fender adds support and stability - Stainless steel hardware

With today’s lightweight components, torque wrench use in the shop is no longer an option — it’s a must for every mechanic. The TW-6.2 is a high-quality, ratcheting, click-type torque wrench that accurately measures and applies the proper amount of torque to a component’s threaded fastener(s). Designed for higher torque settings for repairs and installation in the bottom bracket, cassette lockring and other areas that use a higher torque settings. For lower torque setting, see the TW-5. Comes with its own protective case. - 10–60 Newton meter range (88–530 Inch Pounds) - Adjustable in 0.25 Nm increments - Ratcheting 3/8" drive - Reads and registers for both left hand and right hand threading - Dial-adjust system allows desired torque setting to be preset - Calibrated to be accurate to +/- 4% - Length: 36.2cm (14.25")

Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want. - Limitless remote shifting positions for drop and aero bars - Wired shift buttons can be positioned however the rider prefers - Connect to Blip Box or drop bar eTap levers - Compatible with SRAM RED eTap shift/brake controls

Thirst, quenched. Things, carried. Carry everything you need and keep your hydration handy with the Adventure Handlebar Bag. This bag has a zippered pocket with a 1.5L hydration bladder and an easy-access silicone hose port so you can quench your thirst with ease. Plus, quickly stow a rain jacket, extra layer, and other ride essentials with 9L of capacity and an additional bungee cord and strap up top. A durable, easy to install handlebar bag made with an integrated hydration bladder so you can carry more and stay hydrated wherever you roam. - Roll-top closure with secure buckle keeps your gear safe and dry - Two nylon handlebar straps and single stem strap provide secure attachment - 1.5L HydraPak hydration bladder fits securely in front zippered pocket - Silicone hose port and magnetic hose clasp keeps hydration hose securely in place - Water-resistant construction helps keep your gear dry - Durable materials are made to last with additional reinforcement in high-wear areas - 9L capacity and bungee up top offers additional quick and easy storage

Saddle up and carry more Safely carry your ride essentials through rough and rugged terrain with the Adventure Seatpost Bag. Two buckles around the saddle rails and a hook and loop closure make this bag easy to mount and extra secure. Zippered side entry offers easy access to this bag's 9L of capacity, and an additional bungee cord and strap up top makes it easy to quickly stow a rain jacket, extra layer, and more. A durable saddle bag that installs quickly and securely and features an easy-access side zipper so you can carry more on your bike. - Roll-top closure with secure buckle keeps your gear safe and dry - Two nylon seat rail buckles and single seatpost strap provide secure attachment - Zippered side entry offers easy access - Removeable internal poly frame maintains bag shape without taking up space - Water-resistant construction helps keep your gear dry - Durable materials are made to last with additional reinforcement in high-wear areas - 9L capacity and bungee up top offers additional quick and easy storage

Park Tool's Frame and Fork Straightener is a versatile and productive tool. Its open hook design enables it to straighten not only frames and forks, but also cranks and handlebars and it features vinyl coating on the hook and fulcrum pad to protect painted surfaces. The FFS-2's hook offers 8 inches of fore-aft adjustment and can fit a frame or fork tube of up to 1-3/4 inches in diameter.

The aero-shaped barrel and wide steel base provide stability when pumping and the 3” top mounted gauge is easy to read up to 200 psi (14 bar). The large padded handle provides comfort while the extra-long and tangle-free hose can even reach wheels on bikes mounted in a stand. The SmartHead DX3 with lower-profile air-release button automatically adjusts to fit either Presta or Schrader valves and makes getting the right pressure a simple task.

Our best light, bright enough for trail riding, and with Kindbeam to keep light on the trail and out of oncoming riders' eyes. Do the (b)right thing A do-it-all front light that's powerful enough for off-road riding. Kindbeam keeps more light on the trail ahead of you while avoiding oncoming rider's eyes, for a bright light that won't blind other trail users. A visible fuel gauge, wireless connection to tail light, and Charge-back that works as a battery bank for charging gadgets, round out an industry-leading set of features and make this our best front light option. - Commuter Kindbeam keeps light on the ground ahead of you and out of oncoming riders' eyes - 1000 Lumen high beam setting lights up full path or trail, ideal for use as MTB light - Wirelessly pair with Flare RT for single-button power-up on both front and rear light - Dual fuel gauge clearly shows available battery life and battery life of paired light - USB-C charging port supports chargeback for recharging phone or cycling computer on-the-go - DRL-specific focus, flash, and range flash patterns offer ultimate daytime visibility - Runtimes: high 1000LM — 1.5hrs, low 500LM — 3hrs, day flash 300 LM — 12hrs - Includes Commuter Pro RT light, Adjustable hard mount, and USB-C charging cable

The Ion Pro RT front bike light lets you ride with confidence at all hours of the day. The USB rechargeable light features 5 modes for day and night, and its compact design and adjustable hard mount make it easy to securely attach it to the handlebars of any bike. Product details - Ion Pro RT provides a powerful beam that lights up the full width of any road or trail - 1300 Lumens via high-power CREE LED - 1300LM-1.5hrs, 800LM-3hrs, 400LM-6hrs, night flash-26hrs, day flash 22hrs - Connect with Garmin and Bontrager ANT+ devices for always on, battery status, and control - Includes adjustable light mount that fits bars from 25.4-35.0mm - Blendr compatible with helmet mount available - Includes Ion Pro RT light, Adjustable hard mount, and micro USB charging cable

Carry all of your commute essentials. - Fits 15" laptop - Comes with Velcro straps for rear racks - Upgrade to MIK compatibility with MIK adapter plate Specifications: - Cargo capacity: 600 cu in (10L) - Bag type: Panniers - Dimensions: 36.50cm (l) x 26cm (w) x 23cm (h) - Attachment: Hook and loop strap - Fiber content: 100% Polyester - Material: Woven - Weight: 1254g

An ultra-bright, high-capacity USB rechargeable light providing 850 lumens of light output and five lighting levels, plus reserve for longer run times. Dual-zone refractor lens design allows clear near and far visibility focusing the main beam downward to prevent affecting pedestrians or oncoming traffic. The included and optional handlebar mounts provide placement flexibility for mounting cycle computer, RideCase, single light, dual lights, CubiCubi backup battery, GoPro Session Cameras, and more. - Size: 10.4 x 3.8 x 3.8cm / 4.1" x 1.5" x 1.5" (Light+PowerPack) - Lamp: Cree XLamp XHP50.2 - Battery: 3.7V 3000mAh Lithium Ion (integrated) - Charge / Charge Time (Approx): Micro USB / 4-6hr - Input: 5V / 1A - Output: 6V / 1A - Lamp Housing: Forged aluminum / Injection molded polymer - Mount: Handlebar (25.4 - 31.8mm) (Shim included) - Waterproof: IPX 6 - Dual zone refractor lens, Low battery indicator, optional USB charging dock - Weight: 124g / 4.37oz (Light+PowerPack) MODE / BURN TIME (APPROX) - 850 Lumens (High) / 2.1hr - 450 Lumens (Middle) / 3hr - 200 Lumens (Low) / 7.5hr - 70 Lumens (Steady) / 17hr - 70 Lumens (Blinking) / 30hr

Shock Bushing Press Kit An evolution of our original bushing toolset which required the use of a hammer to pound out shock bushings. The new design uses our threaded handle press system to easily and efficiently remove shock bushing in 12mm and 1/2 inch sizes. - Fits 12mm and 1/2" bushings. - Machined aluminum - Anodized Red

RockShox, 11.4115.092.010, Complete service kit, 2011 Vivid Air

Look the Hiline in the face and it seems to be all about style. Flip it around and you’ll reveal its hidden features. Strategically placed air diffusers, interchangeable nose pads for a custom fit, and co-injected temple tips make this a true sport glass despite its fashionable facade.

Largest Easy-Touch Button In The Industry Keep focused on the trail instead of hunting for buttons. Designed for simplified no-look use, especially when helmet mounted, with easy touch oversized five-point button sensor and LED backlit battery level meter. - USB-C Charging - Go-Pro® and Bar Bracket Included. Rugged looks with impressive light output and smart features, our all new completely redesigned Serfas© True Series MTB headlights will illuminate your path. The Serfas© True 1300 MTB features 1300 lumens of crystal clear bright night time illumination to make out every turn of the trail and 1300 lumens in Flash mode to make sure all eyes are on you. A smart grippy extra large power button with LED backlit battery level indicator ensures surefire operation and convenient battery monitoring so there are no unwelcome surprises on the trail. Go-Pro® and Bar Bracket Included. TSL Headlight Models w/ Button Lock – True Series Headlight User Manual Limited Lifetime Warranty Serfas® warrants to the original purchaser that the product is free of defects in material, construction, and/or workmanship for the lifetime of the product. Battery Warranty – One Year Coverage Serfas® batteries are covered by a 1 year warranty from the original date of purchase. Features: - 1300 Lumen Output - Oversize Easy-Touch Power/Mode Button - Backlit LED Battery Level Indicator - USB-C Charge Port w/ 1A Fast Charging - Last Mode Memory (In Solid Mode) - Go-Pro® and Bar Bracket Included - Removable Li-Ion Battery - Convenient Magnetic Battery Removal - No Tools Required Installation - IPX6 Water Resistance Rating Specs: Solid Mode: - High 1300 Lumens – 1.5 hrs - Medium 650 Lumens – 3.25 hrs - Low 320 Lumens – 7 hrs Flash Mode: - Daytime Flash 1300 Lumens – 49 hrs - Low Flash 190 Lumens – 51 hrs Weight : 128 Grams w/ Bracket Battery: 1-Cell Li-Ion, 3350 mAh Charge Time: 4.5 hrs (Using 2A USB Wall Charger) Color: Black *USB Charging: To ensure stable charging please be sure the USB-C male connection is fully and firmly clicked into place in the headlight's USB-C female charge receptacle to ensure a properly secured connection (an audible click will not always be heard). The integrated headlight battery charge level indicator will display five solidly illuminated blue LED dots when full charge is achieved.

Topeak's Transformer X is a portable floor pump and bike stand combination. The adjustable stand has two hooks that hold your bike upright for repairs or tire inflation via the chainstays and seatstays. Its gauge is attached to the pump's handle for simple reading, and Topeak's SmartHead works with any type of valve you've got. An extra-long hose and included ball/bladder needles make it easy to pump up just about anything.

Simple and economical, Park's Home Mechanic Bearing Cup Press is the perfect addition to your toolbox. With a few quick twists it easily installs all sizes of headset cups and one-piece bottom bracket cups.

With today’s lightweight components, torque wrench use in the shop is no longer an option — it’s a must for every mechanic. The Park Tool TW-5.2 is a high-quality, ratcheting, click-type torque wrench that accurately measures and applies the proper amount of torque to a component’s threaded fastener(s). With a range of 2-14Nm, the TW-5.2 is designed for the lower torque settings that a shop or consumer would use for proper seat post, seat clamp and handlebar / stem applications. Comes with its own protective case.

- Adventure ready saddle mounted removable drybag and holster system - Includes waterproof carry bag with air release valve to keep gear dry and compact - Bag easily slides in and out of holster without having to remove from bicycle - 15L measures 19.7

The SRAM Pro Disc Brake Bleed Kit is designed for servicing SRAM disc brakes systems. - Kit includes 2 syringes, fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting, and DOT5.1 hydraulic fluid - For use with SRAM X0/ XX/ Guide/Level/Code/HydroR/G2 disc brakes - Compatible with DB-G2-R-A1, DB-G2-R-A2, DB-G2-RE-A2, DB-G2-RS-A1, DB-G2-RS-A2, DB-G2-RSC-A1, DB-G2-RSC-A2, DB-G2-ULT-A1, DB-G2-ULT-A2, DB-GDE-R-A1, DB-GDE-R-B1, DB-GDE-RE-A1, DB-GDE-RS-A1, DB-GDE-RS-B1, DB-GDE-RSC-A1, DB-GDE-RSC-B1, DB-GDE-T-A1, DB-GDE-ULT-A1, DB-LVL-A1, DB-LVL-T-A1, DB-LVL-TL-A1, DB-LVL-TLM-A1, DB-LVL-TLM-B1, DB-LVL-ULT-A1, DB-LVL-ULT-B1, DB-X0-B1, DB-XX-A2

A fantastic option for introducing the smallest members of your family to cycling! Compatible with all Adams Trail-A-Bikes, the Baby Seat offers a safe and secure means of getting your entire family out on a ride. • Designed for children aged 1-3 • Equipped with a three-point harness for maximum safety • Foot cups and Velcro straps keep legs and feet secure • Raised head rest provides added security for the neck and head • Cushioned back rest and seat for enhanced comfort • Cushioned grips offer a point of contact for restless hands • Base plate with integrated 25.6mm seatpost mounts to Trail-A-Bike seat tube • Base plate with 27.2mm seatpost available • Weight: 7.8 lb (3.5 kg) • Load rating: 40 lb (18 kg)

The MIK Commuter Trunk Bag offers versatile and secure on-bike storage that's easy to install and remove without the need for tools. It has multiple pockets to keep you organized, and a durable design to keep your gear secure. A sturdy handle makes off-the-bike handling a breeze. - MIK mounting system provides secure, integrated mounting with compatible racks - Made from waterproof material to help keep your gear safe - External pockets, compartments, and strapping help organize accessories and gear - Durable, lightweight construction holds up for daily use - Sturdy handle and included carrying strap for convenient off-bike use - Seven liter capacity - Light loop for easy rear light mounting

Quickly, safely and easily set your crown race with Park's CRS-1 Crown Race Setting System. It includes 6 different inserts (3 for 1-inch and 3 for 1-1/8-inch steerer tubes) that ensure full contact with the crown race for precision installation.

The CRS-15.2 uses two different insert rings to install bearing races on the 1.5-inch and 1-1/4-inch forks. The bearing surface is spared a direct hit by using aluminum inserts. Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately. Included extension allows work on fork steering tubes up to 425mm. - SHIS terminology: The CRS-15 services crown races in SHIS 33 and 40.

The DAG-2.2 is an indispensable shop tool that can be used to both measure and straighten misaligned derailleur hangers solving a high percentage of shifting problems. - Gauge bar made of heavy gauge, chrome plated steel - Adjusts to fit 20" to 29"+ wheels - Replaceable threaded tip - Upgraded large inner shaft for added strength* - Tighter tolerances for improved accuracy* - Improved clearance and reach to fit more frame/hanger combos including low clearance thru-axle derailleur hangers* *Compared to DAG-2

RockShox Dynamic Seal Grease - Recommended for rear shock service